Flex Fire

Flex Fire

Alkaline Rinse

When you thought that you couldn’t get any better results on those trashed out carpets and had originally stated they needed replacing.

Well here is another option, our hottest, most effective cleaning rinse ever.

Flex FIRE extraction rinse is a high pH rinsing solution designed specifically for exceptionally soiled commercial carpet when all others have failed. Combine with Flex Powder with Citrus Solv to remove traffic lanes previously considered uncleanable.

• DISSOLVES QUICKLY – Flex FIRE rinse will dissolve quickly, creating a crystal-clear cleaning solution.
• LOW COST – concentrated powder means you use less and save money.
• EQUIPMENT SAFE – has special additives that help prevent corrosion and buildup in the extractor or truckmount.
• HIGH CLEANING POWER – Flex FIRE rinse will surpass all other extraction agents due to its aggressive alkalinity and high percentage surfactant blend.

DIRECTIONS:
To be used as the primary cleaning agent, or as a rinse agent, in the extraction process for heavily soiled commercial carpets. It’s highly recommended that a water softener be used for best performance results and to prevent precipitation caused by high heat truckmounts and hard water. Flex FIRE uses special rinse agents that perform best in warm water, temperatures above boiling will cause product separation. If a water softener is not used, reduce heat to below 200 degrees.

Dilution: 25mg/20L.     RTU pH: 11.3-11.5     Contains: 2.8Kg’s

Flex Fire Spec Sheet

SDS Flex Fire